Powering Galil card with Variable Power Supplies

Hi kdelaney,

The DMC-21x3 is able to be powered in a couple of ways depending on the ordered option(s).

If your controller is equipped with the DC-DC option, then you can power it with a single DC supply. I'd need the full part number of the controller in order to specify what the acceptable voltage range is.

If your controller is not equipped with the DC-DC option, they you will need to supply +5V, +12V and -12V to the 6 pin power connector on the controller.

Please email me either your full part number or controller serial number so that I can help you determine the correct means of powering your controller.