Hi Can the AMP-20540 (connected to a DMC-2183) be set up to run in 'linear' mode rather than PWM? Thanks Comments 1 troym_galil on 01/08/2015 - 17:08 The AMP-20540 is a PWM amplifier with a switching frequency of 60kHz. You would need a linear amplifier if you did not want a switching amplifier. Check out this article as it will explain the differences between linear and PWM. http://www.galil.com/news/drives/servo-amplifier-types-linear-and-pulse… Thanks, Log in or register to post comments
troym_galil on 01/08/2015 - 17:08 The AMP-20540 is a PWM amplifier with a switching frequency of 60kHz. You would need a linear amplifier if you did not want a switching amplifier. Check out this article as it will explain the differences between linear and PWM. http://www.galil.com/news/drives/servo-amplifier-types-linear-and-pulse… Thanks,
troym_galil on 01/08/2015 - 17:08
The AMP-20540 is a PWM amplifier with a switching frequency of 60kHz. You would need a linear amplifier if you did not want a switching amplifier.
Check out this article as it will explain the differences between linear and PWM.
http://www.galil.com/news/drives/servo-amplifier-types-linear-and-pulse…
Thanks,