Analog input signal issue

Hi patilnitin123,

When you query the status of the Analog Input 1, what is the reported voltage? You will want to first make sure your Analog Inputs are configured for the correct voltage level. Using the AQ command you can configure the Analog Inputs to function from 0-5V. If you have not issued an AQ command, the default state would be +/- 10 V. Issue AQ 3, and then connect the device again and query Analog Input 1.

More information on the AQ command can be found here:
http://www.galilmc.com/download/comref/com3xx1x/index.html#analog_input_...