Skip to main content
Submitted by Harish Menon on Thu, 04/27/2000 - 06:49

Comments 3

Galil_Todds on 04/27/2000 - 08:26

Arun_Mali on 03/22/2016 - 21:33

im going to use dmc 4143 first time please guide me to connect it to the 2-axis system only XY axis using servo and 2-analog inputs are to be use.....

KushalP on 01/26/2017 - 15:51

Hi Arun_Mali,

The full information on wiring and connecting the DMC-41x3 can be found in the DMC-41x3 User Manual starting with Chapter 2. For specific questions on your applications such as motors, modes of motion and other things please email me directly at kushalp at galil dot com.