Hello!
I'm trying to use your Cad to DMC converter, but I keep getting
[code]DXF to DMC Conversion failed. Conversion error(s).
List of conversion errors/warnings:
You must define FIRST somewhere in your drawing.
FIRST should be placed very near where you want the
motion to start.[/code]
I don't understand what does this mean: what's "FIRST"? Where and how should I define "FIRST"?
Thank you!
Galil_AndyH on 09/07/2010 - 07:46
Read the CAD to DMC user manual, this will have the information you need.
http://www.galilmc.com/support/manuals.php
Freestyler on 09/07/2010 - 08:03
Sorry, I didnt noticed that page. Many thanks!
Freestyler on 09/10/2010 - 04:02
Hello again,
I still have problems with the converter... I've made a DXF with a single line, FIRST, LAST, the SCALE, and the converter still complains with the same error.
Here's the DXF: http://rapidshare.com/files/418222751/Drawing2_1_prova2.dxf
Thanks
Galil_AndyH on 09/10/2010 - 10:35
Take a look at section 2.2 of the manual. Specifically the "Association Rules" section.
There are also working examples in the C:\Program Files\galil\CADTODMC\DXF directory.
aolivares on 11/13/2018 - 15:15
I found in one of the application examples this software, but is not available anymore? I think it will help a lot for my project, please contact me