RIO-47100's LadderInterface DMC Code

Submitted by HsuHuiKuang on Thu, 12/18/2008 - 19:54

I got a RIO-47100 with Firmware Rev 1.0 beta0821.
When I download the code generate from LadderInterface Ver 0.0.1.0
to GalilTools, an error happen.
GalilTools can't recognize the Command in line 6

#ladlp;ZI0,16,80,0,88,0;a[16]=(a[0]=0);

Is there anyone having an idea?

Thanks

Comments 1

Galil_AndyH on 12/19/2008 - 08:35

The ladder interface software requires 1.0a firmware or later. Beta versions of RIO firmware will not work with the Ladder software. The RIO will need to be returned to Galil for upgrade from beta to a released version of firmware. E-mail support@galilmc.com for return information.

Since our introduction of the first microprocessor-based motion controller in 1983, Galil has remained a leading innovator. By offering our customers powerful, cost-effective and simple-to-use motion controllers and PLCs backed by superior application support, our commitment is to be the primary source for any motion control and I/O application.

Address:  270 Technology Way, Rocklin, CA 95765

Toll-Free:  (800) 377-6329 (US Only)

Phone:  (916) 626-0101

Fax:  (916) 626-0102

Email:  support@galil.com

2020 © Galil All Rights Reserved.