What are the steps for use DMC-4060 whitout sensors hall?
I'm follow step in to user manual Step 8b. Connect Sinusoidal Commutation Motors unsuccessfully.
Thanks.
Comments 4
Galil_AndyH on
02/23/2009 - 08:35
If you are using the AMP-430x0 with a brushless motor, you need hall sensors for the motor commutation. The Sinusoidal Commutation is only for external sinusoidally commutated drives.
Fosfato on
02/23/2009 - 11:31
Many thanks for rapid answered.
Fosfato on
02/26/2009 - 02:38
What do I need for configuring DMC-4060 with 2 axis sinusoidal control without sensor hall feedback?
Galil_AndyH on
02/26/2009 - 08:48
1Vpp Sine encoder feedback?
You need the ICM-42100
You will need to return the controller for upgrade if you do not have this ICM already. E-mail support@galilmc.com for details.
Galil_AndyH on 02/23/2009 - 08:35
If you are using the AMP-430x0 with a brushless motor, you need hall sensors for the motor commutation. The Sinusoidal Commutation is only for external sinusoidally commutated drives.
Fosfato on 02/23/2009 - 11:31
Many thanks for rapid answered.
Fosfato on 02/26/2009 - 02:38
What do I need for configuring DMC-4060 with 2 axis sinusoidal control without sensor hall feedback?
Galil_AndyH on 02/26/2009 - 08:48
1Vpp Sine encoder feedback?
You need the ICM-42100
You will need to return the controller for upgrade if you do not have this ICM already. E-mail support@galilmc.com for details.