Skip to main content
Submitted by hushingi on Mon, 02/05/2007 - 07:20

I used WSDK of ver5.15,but not work correctly.
The OS is XP.
When i run the WSDK
The information and problem show:
"An interrupt form the controller has occurred,stauts byte=58".
"You must establish a communication session with a controller before using the option."

I has been connected the encoder cable,but not show the position count.
How i solve it?
thank you

Comments 3

Galil_AndyH on 02/05/2007 - 11:50

Which controller are you using?

hushingi on 02/05/2007 - 15:19

Controller:Galil DMC-1842 motion controller

Galil_AndyH on 02/06/2007 - 14:22

You are having a communication problem between the PC and the controller. E-mail support@galilmc.com with a screen shot of the error that is occurring.