Forums - Galil: We Move The World
Topic Options
#11136 - 09/09/11 01:05 PM servo buzz at stop
KarlTownsend Offline
Member

Registered: 12/28/03
Posts: 37
I have a cnc mill that has run with Galil for many years now. We've had occasional trouble with a servo buzzing or vibrating back and forth a very short distance while at the stop position. its been present for a long time but has gotten worse recently.

These are DC brushed servos running in toque mode using AMC brushed servo amps, model 30A8.

I first re-tuned with WSDK using general tuning and got
P 60 D400 I40 no help with the buzzing

Then I tried reducing everything 10% (55,360,36) and 20%(49.5,324,24) then tried a big drop in I (49.5,324,24) and then a big drop in D (49.5,275,24) No help at any setting.

What should i try?

Thanks

Karl

Top
#11161 - 09/20/11 05:37 PM Re: servo buzz at stop [Re: KarlTownsend]
AndyH Offline

Member

Registered: 12/20/05
Posts: 583
Loc: Rocklin, CA
Try KI of 0 and see if the problem goes away. Post back here with results.
_________________________
Andy Herum
Senior Applications Engineer
Galil Motion Control

Top
#13892 - Yesterday at 06:09 PM Re: servo buzz at stop [Re: KarlTownsend]
lolgamegd01 Online   content
Junior Member

Registered: 09/01/14
Posts: 4
I also worry about this matter, there is no know?
There are good people quick answers, I will thank you!


____________________________
Here is my FIFA 15 Coins will sent to you.
link: http://www.fifa15online.co.uk/

Top


Moderator:  CoryB