Product Info QuickTab Set

PCI Optima Motion Controllers, 1-8 axes

For new applications, Galil recommends the new generation, DMC-18x6.

The DMC-18x0 PCI motion controller is a member of the Optima Series, Galil's prior-generation, multi-axis motion controllers. The DMC-18x0 controller accommodates 1- through 8-axis formats and allows control of step or servo motors on any combination of axes. Any mode of motion can be programmed including linear and circular interpolation, contouring, electronic gearing and ecam. Like all Galil controllers, programming the DMC-18x0 is simplified with two-letter, intuitive commands and a full set of software tools such as WSDK for servo tuning and analysis.


Features

  • For new applications, Galil recommends the new generation, DMC-18x6 series controllers.
  • PCI card in 1 through 8 axis versions: DMC-18x0 where x=1,2,3,4,5,6,7,8 axes
  • Accepts up to 12 MHz encoder frequencies for servos and outputs pulses up to 3 MHz for steppers
  • PID compensation with velocity and acceleration feedforward, integration limits, notch filter and low-pass filter.
  • Modes of motion include jogging, point-to-point positioning, contouring, linear and circular interpolation, electronic gearing and ECAM
  • Multitasking for concurrent execution of up to eight application programs
  • Non-volatile memory for application programs, variables and arrays
  • Dual encoders, home input and forward and reverse limits accepted for every axis
  • 8 Uncommitted inputs and 8 outputs for 1- through 4-axes models, 16 inputs and 16 outputs for 5- through 8-axis models
  • Expansion for 64 I/O with optional DB-14064
  • 8 uncomitted analog inputs
  • High speed position latch and output compare
  • 2nd FIFO for instant access to status and parameters
  • High-density shielded cables and optical isolation for noise immunity.
  • Connects directly to AMP-19540 4-axis drive for cost-effective, multi-axis controller/drive solution. Drives brush or brushless servos up to 500 Watts each. Or, connect to external drives of any power range using ICM-2900 or ICM-1900 interconnect module
  • Communication drivers for Windows, QNX, and Linux
  • Custom hardware and firmware options available