Skip to main content

This article discusses the basics of the options for using a BiSS encoder with a Galil motion controller or Pocket PLC.

The Galil BiSS interface is a standard upgrade option for the following controllers:

  • DMC-40x0 10/100Base-T Ethernet/RS232 Accelera Series 1-8 axis
  • DMC-41x3 10/100Base-T Ethernet/USB Econo Series 1-8 axis
  • DMC-21x3 10Base-T Ethernet/RS232 Econo Series 1-8 axis
  • RIO-47xxx 10/100Base-T Ethernet Intelligent I/O Controller
  • DMC-18x6 PCI Accelera Series 1-8 axis
  • DMC-18x2 PCI Econo Series 1-4 axi
  • CDS-3310 10/100Base-T Ethernet/RS232 1 axis controller with 500W servo drive

Galil supports a point to point unidirectional BiSS interface.  Each BiSS encoder is wired directly to the Galil controller, and the controller addresses each individual encoder independently.

Galil supports single-turn and multi-turn rotary and linear absolute encoders from the following companies for a $100 adder/4axis to the standard ICM or DB-28040 and a $75 adder for the RIO.  Use the part number -BiSS when ordering.

  • Hengstler Absolute BiSS encoders (AD/AC series)
  • Renishaw Resolute

If your encoder is not on the above list, please contact Galil to speak with an Application Engineer to discuss your application.

For more information on the BiSS protocol - http://www.biss-ic.de/