Skip to main content

The ICS-48100 is a breakout module that plugs directly into the D-sub connectors of the DMC-40x0  motion controller and converts them into a 100pin Connector. This is especially useful for those that would like to upgrade to the DMC-40x0 series from a motion controller with a 100pin cable (such as the DMC-22x0 or DMC-18xx series) but do not want to change their wiring. This interconnect board will allow users to keep their existing 100 pin cable & interconnect module the same.

ICS-48100 mounted on DMC-40x0 controller

For complete details, go to Application Note #2511 located here:

http://www.galil.com/download/application-note/note2511.pdf