Galil's AMP-19540 is a 4-axis amplifier for driving brush or brushless motors up to 500 Watts. By interfacing directly to Galil's DMC-18x2, DMC-18x0, or DMC-18x6 controllers, it provides a cost-effective controller/drive solution for multi-axis applications. The AMP-19540 contains four transconductance, PWM amplifiers for driving brush or brushless motors. Each amplifier operates at 18V to 80V dc, up to 7 Amps continuous, 10 Amps peak. The AMP-19540 gain setting is easily configured with jumpers. The PWM switching frequency is 60 kHz.
The AMP-19540 enclosure has dimensions of 6.8" x 8.75" x 1". It interfaces to
Galil's DMC-18xx PCI bus controller with a single, 100-pin high density SCSI
cable. Signals for each axis are brought out through D-type connectors located
on the AMP-19540. For applications with less than three axes, the AMP-19520
two-axis model is available. A shunt regulator option is also available
-
Connects to Galil DMC-18xx PCI bus motion controller to provide a complete
controller/drive solution with minimal wiring
-
18V to 80V dc; 7 Amps continuous, 10 Amps peak per axis
-
Drives four servo motors up to 500 Watts each
-
Configurable for driving brush or brushless motors
-
High-bandwidth PWM drives with 60 kHz switching frequency
-
Compact 6.8" x 8.75" x 1" metal enclosure
-
Provides 15-pin Hi-density D-sub connectors for X,Y,Z and W axes
-
Connects to DMC-18xx PCI controller with single 100-pin SCSI cable
-
Shunt Regulator option is available
For More Information:
| Part Number | Description | Unit Price (U.S.) Qty 1 / qty 100 |
|||
 |
|
||||
| AMP-19520 | 2-axis drive for two brush or brushless motors up to 500 watts | $595 / $395 | |||
|
|
||||
| AMP-19540 | 4-axis drive for four brush or brushless motors up to 500 watts | $795 / $495 | |||
|
|
||||
| -SR option | Shunt regulator option | $50/ $25 | |||
|
|
||||
| Cable-15-1m | 15-pin High Density D to discrete wires in 1 meter length (-2m for 2meter lengths). Use one for each axis on AMP-195x0. | $25/ $17 ($30/ $20) | |||
|
|
||||
| Cable-44-1m | 44-pin HD to discrete wires in 1 meter length (-2m for 2meter lengths). Use one for each AMP-195x0. | $35/ $24 ($40/ $27) | |||
|
|
||||
| ICS-48044-M | 44-pin High Density D to screw terminals. Use one for each amplifier with AMP-195x0 in substitution of Cable-44. | $75/ $50 | |||
|
|
||||
| ICS-48015-M | 15-pin High Density D to screw terminals. Use one for each axis on AMP-195x0 in substitution of Cable-15. | $50/ $35 | |||
Galil offers additional quantity discounts for purchases between 1 and 100. Contact Galil for a quotation. U.S. Pricing. 100-Piece Price Guarantee
applies for U.S. customers |
|||||