Optima Cables and AdaptorsOptima Cable Order Info

Legacy Cables and AdaptorsLegacy Cable Order Info

Econo Cables and AdaptorsEcono Cable Order Info

• CABLE-100:
  • Required for Main 1-4 axis connector on Optima Controllers and additional CABLE-100 required for Main 5-8 axis connector
  • 100 Pin high density connector on both ends
  • Available in 0.8 Meter, 1Meter, 2Meter and 4Meter Length
    
    
• CABLE-80:
  • Used for Extended I/O of Optima Controllers (DMC-2x00 controllers, DMC-17x8 controllers, DMC-16x0 controllers, DMC-13x8 controllers, DMC-12x8 controllers)
  • 80 Pin high density connector on both ends
  • Available in 1Meter and 4Meter Length
    
    
• CABLE-36:
  • Used for all Auxiliary Encoder Inputs of DMC-2x00 controllers, DMC-16x0 controllers and DMC-13x8 controllers
  • 36 Pin high density connector on both ends
  • Available in 1Meter and 3Meter Length
    
    
• CABLE-26-25:
  • Used for Auxiliary Encoder Inputs for axes 1 to 4 of DMC-18x0 controllers, DMC-17x0 controllers and DMC-12x0 controllers. Additional cable required for 5-8 axes controllers
  • 26 Pin IDC connector to 25 Pin D-Type
  • Standard Length 1Meter. Different lengths available
    
    
• CB-50-100:
  • Adapts 2 50pin ribbon cables for CABLE-100. Used for accessing 5-8 axes connectors of DMC-1750 thru DMC-1780 and DMC-1200 controllers. Can also be used to separate signals of CABLE-100 into ribbon cables
    
    
• CB-50-80:
  • Adapts 2 50pin ribbon cables for CABLE-80. Used for accessing extended I/O of DMC-17x8 and DMC-12x8 controllers. Can also be used to separate signals of CABLE-80 into ribbon cables
    
    
• CABLE-9-PIND:
  • Used for Accessing main RS-232 Serial Port of DMC-2x00 controllers
  • Available in 2Meter Length
    
    
• CABLE-USB:
  • Used for Accessing USB Port of DMC-2000 controllers
  • Available in 2Meter Length and 3 Meter Length
    
    
• CONNECTOR-100:
  • 100 Pin High Density, Board Mount Connector for prototype
  • Available in Limited Qty
    
    

Recommended Cables and Interconnect for DMC-1200 (pdf)

Recommended Cables and Interconnect for DMC-13x8 (pdf)

Recommended Cables and Interconnect for DMC-1600 (pdf)

Recommended Cables and Interconnect for DMC-1700 (pdf)

Recommended Cables and Interconnect for DMC-1800 (pdf)

Recommended Cables and Interconnect for DMC-2x00 (pdf)

• J2 - MAIN
  
  • 60 pin ribbon cable (standard length 30", different lengths available on request)
    
  • Provides access to main controller signals
  • Included with controller order
    
    
• J5 - GENERAL I/O
  
  • 26 pin ribbon cable (standard length 30", different lengths available on request)
    
  • Provides access to general I/O signals
  • Included with controller order
    
    
• J4 -DRIVER
  
  • 20 pin ribbon cable (standard length 30", different lengths available on request)
    
  • Provides access to stepper motor signals
  • Included with controller order when requested
    
    
• J3 - AUX ENCODER
  
  • 20 pin ribbon cable (standard length 30", different lengths available on request)
    
  • Provides access to auxiliary encoder signals
  • Included with controller order when requested
    
    
• CABLE-9-PIND
  
  • Used for Accessing main RS-232 Serial Port of DMC-15x0 controllers
  • Available in 2Meter Length
    

• CABLE-37-PIND
  
  • 37 pin D-type, male to male (shielded, 30")
    
  • Provides access to main controller signals via ICM-1460 of DMC-1410, DMC-1412, DMC-1415 controller
    
    
• CABLE-40-PIN RIBBON
  
  • 40 pin Ribbon Cable to 37Pin D-Type male (30")
    
  • Provides access to main controller signals
    
    
• CABLE-9-PIND
  
  • Used for Accessing main RS-232 Serial Port of DMC-1412, 1414, 14x5, 34x5, 21x2, 21x3 controllers.
  • Available in 2Meter Length
    

Recommended Cables and Interconnect for DMC-1410 (pdf))

Recommended Cables and Interconnect for DMC-1411 (pdf))

Recommended Cables and Interconnect for DMC-1412 (pdf))

Recommended Cables and Interconnect for DMC-18x2 (pdf))