This board mounts directly onto the back of the controller and provides 64 I/O points configurable by the user as either inputs or outputs. I/O is configurable as TTL inputs or TTL outputs in blocks of 8. For the DMC-1800, DMC-18x2 and DMC-18x6 controller, the first bank must be configured as outputs.

The I/O is accessible through (2) 50-pin headers which are compatible with the extended I/O of the DMC-17x8 controller. A CB-50-80 adapter can be used to convert the IDC connectors to an 80-pin connector, comparable to the extended I/O of the DMC-2000 and DMC-2100. Using the adapter and the CABLE-80 allows for direct connection to the Galil IOM-1964 opto-isolation module.

The dimensions of the DB-14064 are 4.45" x 5.0".

The DB-14064 daughter board must be ordered with a new controller, otherwise, existing controllers must be returned to Galil for modification and proper mounting.

• Provides 64 extended I/O points for DMC-14x5, 34x5, 1700, 1800, 18x2, 18x6 controllers
  
  
• Pin compatible with the I/O of the DMC-17x8 controller
  
  
• Standard Galil command used for configuration and access
  
  
• Pin compatible with Grayhill and Opto-22 modules
  
  
• Can be used with the CB-50-80 adapter and CABLE-80 to interface to the IOM-1964 opto-isolation module
  
  

Complete Description (pdf)

Cable Information