The ICM-2900 interconnect module provides easy connections between the Optima series controller and other system elements such as amplifiers, encoders, and external switches. The ICM- 2900 accepts the 100-pin main cable and provides screw terminals for quick and easy connection. Use one ICM-2900 for every four axes (Two required for 5 or more axes).
The ICM-2900 mounts directly to the DMC-2000 enclosure. The ICM-2900-FL has flanges which allow standard screw-type mounting for card-level Optima controllers.
Specify -OPTO for optoisolation of the general outputs.
Specify -HAEN for amplifiers requiring a high amplifier enable signal and -LAEN for amplifiers requiring a low amplifier enable.
Custom ICM options are available.
- Separates Optima Series Main Cable into individual screw-type terminals
- Provides access to up to 4 axes
- Clearly identifies all terminals
- Easy to re-configure for amplifiers requiring high / low or +5V / +12V amplifier enable signals
- Provides easy connection of opto-isolation power to 5V supply from controller
- Available -OPTO option to provide opto-isolation for general outputs
For More Information:
Description of Opto-Isolation Option
ICM-2900 Flange Mount Mounting Dimensions
| Part Number | Description | Unit Price (U.S.) Qty 1 / qty 100 |
|||
 |
|
||||
| ICM-2900 | Interconnect Module (Access to up to 4 Axes) | $295 / $195 | |||
|
|
||||
| ICM-2900-FL | ICM-2900 with Flanges (Recommended for board level products) | $295 / $195 | |||
|
|
||||
| -HAEN Option | Specifies High Amplifier Enable Signal (Standard) | No charge | |||
|
|
||||
| -LAEN Option | Specifies Low Amplifier Enable Signal | No charge | |||
|
|
||||
| -OPTO Option | Specifies Opto-isolation to be added for General Outputs | $+50 | |||
|
|
||||
| -XXXX Option | Custom ICM option | Consult factory | |||
|
|
||||
Galil offers additional quantity discounts for purchases between 1 and 100. Contact Galil for a quotation. U.S. Pricing. 100-Piece Price Guarantee applies for U.S. customers |
|||||