DMC-14x5

Single and Dual-Axis Motion Controllers With Ethernet/RS232

Product Description

The DMC-1415 and DMC-1425 are economical, one and two axis motion controllers with an Ethernet 10Base-T and RS232 port. The controllers are available as a card-level product or in a metal enclosure with a power supply.

With a 32-bit microcomputer, the single and dual axis controllers provide such advanced features as PID compensation with velocity and acceleration feedforward, program memory with multitasking for simultaneously running two applications programs, and uncommitted I/O for synchronizing motion with external events. Modes of motion include point-to-point positioning, jogging, contouring, electronic gearing and ecam. The DMC-1415 single-axis controller accepts inputs from two encoders which is useful for electronic gearing applications. The DMC-1425 dual-axis controller includes linear and circular interpolation for precise, coordinated XY motion. The DMC-1425 can be specified to operate two servo or two stepper motors.

Like all Galil controllers, DMC-14x5 programming is simplified with two-letter, intuitive commands and a full set of software tools for servo tuning and analysis.

For More Information:

Pricing & Ordering Info

Questions?

Call 1.800.377.6329 to speak with a Galil Application Engineer.

Product Features

DMC-1415: 1-axis; DMC-1425: Controls 2 steppers or 2 servos
Provides Ethernet 10BASE-T and one RS232 port up to 19.2 kb
Ethernet supports multiple masters and multiple slaves
Supports ModBus protocol for communication with I/O devices
Accepts up to 12 MHz encoder frequencies for servos and 3 MHz for steppers
Available in card-level format or as a box-level product which accepts 90-260 VAC
Advanced PID compensation with Velocity and Acceleration feedforward, integration limits and notch filter
Modes of motion: jogging, point-to-point positioning, contouring, electronic gearing and ECAM
DMC-1415 accepts inputs from two encoders for gearing or dual-loop applications
DMC-1425 includes linear and circular interpolation mode for coordinated XY motion
Multitasking for concurrent execution of two application programs
Non-volatile memory for application programs, variables and arrays
DMC-1415: 7 uncommitted digital inputs, 3 digital outputs, 2 analog inputs
DMC-1425: 3 uncommitted digital inputs, 3 digital outputs, 2 analog inputs
Expansion for 64 I/O with DB-14064(only available with Card Level product)
Forward and reverse limits and home input
High speed position latch and output compare
DMC-14x5-CARD 3.75" x 5.0"; DMC-14x5-BOX 5.10" x 3.0" x 6.8"
Communication drivers for Windows, QNX, and Linux

Part Number	Description	1pc/100pc
DMC-1415	Ethernet 1-axis CARD	$595 / $395
DMC-1415-box	Ethernet 1-axis BOX	$795 / $545
DMC-1425-servo	Ethernet 2-axis servo CARD	$695 / $445
DMC-1425-servo box	Ethernet 2-axis servo BOX	$895 / $595
DMC-1425-stepper	Ethernet 2-axis stepper CARD	$695 / $445
DMC-1425-stepper box	Ethernet 2-axis stepper BOX	$895 / $595
DMC-34x5	Distributed option- no extra charge	same as DMC-14x5
CABLE-37-pinD	37-pin cable	$25 / $15
ICM-1460	Interconnect module	$145 / $95
ICM-1460-STEPPER	Interconnect module for steppers	$145 / $95
ICM-1460-OPTO	ICM with optoisolation	$195 / $145
AMP-14110-100mA	1-axis 100mA servo amp	$75 / $55
AMP-14110-1A	1-axis 1A servo amp	$100 / $80
AMP-14120-100mA	2-axis 100mA servo amp	$125 / $105
AMP-14120-1A	2-axis 1A servo amp	$150 / $130
CABLE-9-pinD	RS232 cable	$10 / $10
DB-14064	64 I/O expansion board	$295 / $195
CABLE-80-1m	extended I/O cable; 1 meter	$125 / $95
CABLE-80-4m	extended I/O cable; 4 meter	$150 / $105
CB-50-80	50-pin to 80-pin (for DB-14064)	$75 / $50
-16 bit ADC for analog inputs	16-bit analog-to-digital	$100 / $60
-DC converter option	option for DC power input (BOX only)	$100 / $70
GalilTools	GalilTools	$195
GalilTools-Lite	GalilTools-Lite (editor/terminal/watch)	$20 CD
ActiveX Toolkit	Active X toolkit	$595

Note: Pricing shown is for domestic purchases only.