Sales & Support: 1.800.377.6329

Print This Page

DMC-22x0

Ethernet/RS232 Optima Motion Controllers, 1-8 axes

DMC-22x0_image

Product Description

**For new applications, Galil recommends the new generation, Accelera series DMC-40x0.**

The DMC-22x0 stand-alone motion controller is a member of the Optima Series, Galil's prior-generation, multi-axis motion controllers. The DMC-22x0 features 10Base-T/100Base-T Ethernet connectivity. The controller is packaged in a compact, rugged enclosure and contains an internal power supply for direct connection to 90-250 V AC. The DMC-22x0 controller accommodates 1- through 8-axis formats and allows control of step or servo motors on any combination of axes. Any mode of motion can be programmed including linear and circular interpolation, contouring, electronic gearing and ecam. Like all Galil controllers, programming the DMC-22x0 is simplified with two-letter, intuitive commands and a full set of software tools such as WSDK for servo tuning and analysis.

Questions?

Call 1.800.377.6329 to speak with a Galil Application Engineer.

Product Features

  • Ethernet 10/100 Base-T with auto-negotiate function (10/100Base-F optional; Two RS232/422 ports up to 115kb.
  • Ethernet supports multiple masters and multiple slaves allowing communication with multiple computers and I/O devices
  • Supports Modbus protocol for communication with I/O devices
  • Accepts up to 12 MHz encoder frequencies for servos and 3 MHz for steppers
  • PID compensation with velocity and acceleration feedforward, integration limits, notch filter and low-pass filter.
  • Modes of motion include jogging, point-to-point positioning, contouring, linear and circular interpolation, electronic gearing and ECAM
  • Multitasking for concurrent execution of up to eight application programs
  • Non-volatile memory for application programs, variables and arrays
  • Dual encoders, home input and forward and reverse limits accepted for every axis
  • 8 uncommitted inputs and 8 outputs for 1- through 4-axes models; 16 inputs and 16 outputs for 5- through 8-axis models
  • 8 uncomitted analog inputs
  • 64 configurable I/O. Use IOC-7007 for additional I/O & Analog Expansion
  • High speed position latch and output compare
  • High-density shielded cables and optical isolation for noise immunity
  • 12.1" x 2.2" x 6.3" metal enclosure; Accepts 90-250V AC
  • Custom hardware and firmware options available
  • RoHS CompliantCE Certified
Part Number Description 1pc/100pc
DMC-2210 Ethernet 10/100-baseT/RS232 1-axis $1595 / $995
DMC-2220 Ethernet 10/100-baseT/RS232 2-axis $1995 / $1145
DMC-2230 Ethernet 10/100-baseT/RS232 3-axis $2395 / $1195
DMC-2240 Ethernet 10/100-baseT/RS232 4-axis $2595 / $1295
DMC-2250 Ethernet 10/100-baseT/RS232 5-axis $2895 / $1445
DMC-2260 Ethernet 10/100-baseT/RS232 6-axis $3095 / $1545
DMC-2270 Ethernet 10/100-baseT/RS232 7-axis $3295 / $1645
DMC-2280 Ethernet 10/100-baseT/RS232 8-axis $3495 / $1745
DMC-22x0-ETL ETL option. Add to DMC-22x0 price. $100 / $50
CABLE-100-1m 100-pin cable; 1 meter $175 / $135
CABLE-100-2m 100-pin cable; 2 meter $190 / $145
CABLE-100-4m 100-pin cable; 4 meter $210 / $160
CABLE-36-1m auxiliary encoder cable;1 meter $90 / $75
CABLE-36-3m auxiliary encoder cable;3 meter $110 / $90
CABLE-80-1m extended I/O cable; 1 meter $135 / $102
CABLE-80-4m extended I/O cable; 4 meter $160 / $112
CABLE-9-pinD RS232 female to female straight through cable $10 / $10
ICM-2900 interconnect for DMC-2xx0 $295 / $195
ICM-2900-OPTO ICM with opto outputs $345 / $245
ICM-2908 ICM for auxiliary encoders $125 / $95
AMP-19520 ICM with two 500W servo drives $595 / $395
AMP-19540 ICM with four 500W servo drives $795 / $495
-SR for AMP-195x0 Shunt regulator option for AMP $50 / $25
AMP-1910 1-axis servo amp $695 / $470
AMP-1920 2-axis servo amp $1045 / $695
AMP-1930 3-axis servo amp $1395 / $920
AMP-1940 4-axis servo amp $1745 / $1145
-16 bit ADC for analog inputs 16-bit analog-to-digital $100 / $60
SSI option (hardware adder) SSI Interface; Adder to DMC-22xx $50 / $45
DC converter option for -2xx0 box option for DC power input $100 / $70
CB-1500-100 Legacy to Optima Converter board $50 / $45
CB-1500-96 Legacy to DMC-21x3 converter $50 / $45
WSDK Servo Design Kit $195
ActiveX Toolkit Active X toolkit $595
Note: Pricing shown is for domestic purchases only.