The DMC-1410 for the ISA bus is a member of the Econo Series, Galil's latest generation of single-axis motion controllers which are half the size and half the price of multi-axis controllers. The DMC-1410 can handle the most demanding applications with such features as an extra encoder input for electronic gearing, program memory with multitasking, uncommitted I/O and user-selectable stepper or servo motor control. Modes of motion include point-to-point positioning, jogging, contouring, electronic gearing and ecam. Programming the DMC-1410 is simplified with two-letter, intuitive commands and a full set of software tools such as WSDK for servo tuning and analysis, ActiveX Tool Kit for Visual Basic users and a C-Programmers Tool Kit. The Econo Series controllers do not include uncommitted analog inputs and are not optoisolated. Use the DMC-1710 Optima controller if you require these features.
- Accepts up to 8 MHz encoder frequencies for servos and 2 MHz for steppers
- Advanced PID compensation with Velocity and Acceleration feedforward and integration limits
- Modes of motion include jogging, point-to-point positioning, contouring, electronic gearing and ECAM
- Multitasking for concurrent execution of two application programs
- Memory for application programs, variables and arrays
- Accepts inputs from two encoders for gearing or dual-loop applications
- 7 Uncommitted digital inputs, 3 digital outputs
- High Speed position capture
- Forward and reverse limits and home input
- Sinusoidal commutation for brushless servo motors
- 37-Pin D-type connector
- Custom hardware and firmware options available
For More Information:
Complete Specifications (pdf)
Programming Examples (pdf)
Recommended Cables and Interconnect (pdf)
User Manual (pdf)
Specifications are offered in Acrobat PDF format, which requires Adobe Acrobat Reader.
| Part Number | Description | Unit Price (U.S.) Qty 1 / qty 100 |
|||
 |
|
||||
| DMC-1410 | ISA single-axis controller | $595 / $395 | |||
|
|
||||
| ICM-1460 | Interconnect Module | $145 / $95 | |||
|
|
||||
| ICM-1460-OPTO | Interconnect with optoisolated inputs and outputs | $195 / $145 | |||
|
|
||||
| CABLE-37-pin D | 37-pin cable with D-type connector | $25 | |||
|
|
||||
| Upgrade Options | two sets of PID, anti-friction bias, absolute or SSI sensors, backlash and leadscrew error compensation, profile smoothing, anti-resonance profiling, high resolution gearing, password protect, memory expansion, closed-loop steppers, coordinate transformation | one-time setup charge | |||
|
|
||||
| Galil Utilities | Communication drivers for QNX, DOS, Win 3.1, 95,98,2000 and NT | No charge for download ($20 for CD) |
|||
|
|
||||
| C - Programmers Tool Kit |
C library with manual | No charge for download ($20 for CD) |
|||
|
|
||||
| ActiveX Tool Kit | Software tools for Visual Basic | $595 | |||
|
|
||||
| WSDK Servo Tuning Software |
Servo tuning and analysis software | $195 | |||