Sales & Support: 1.800.377.6329

Print This Page

Click here to
REGISTER

Register for full access to Galil's on-line tutorials, product manuals, downloads, and more.

Product Overview

Galil Motion Control is the leading supplier of high-performance, cost-effective and easy-to-use controllers with over 500,000 controllers installed world-wide. Galil's complete line of motion controllers includes single and multi-axis; bus-based and stand-alone; and box-level and card-level controllers. The Accelera Series offers the highest speed and performance while the Econo Series is designed for the lowest cost. Galil's Single-Axis controller series offers cost-effective, compact solutions for single-axis applications. The RIO Pocket PLC provides an intelligent solution for I/O.

Product List

Accelera Series: Sizzling Speed. Fully Loaded.
DMC-40x0 10/100Base-T Ethernet/RS232 Accelera Series 1-8 axis
DMC-18x6 PCI Accelera Series 1-8 axis

Econo Series: For extremely cost-sensitive applications.
DMC-41x3 10/100Base-T Ethernet/USB Econo Series 1-8 axis
DMC-21x3 10Base-T Ethernet/RS232 Econo Series 1-8 axis
DMC-18x2 PCI Econo Series 1-4 axis

Single Axis: Cost-effective solutions for single-axis applications.
DMC-300xx 10/100Base-T Ethernet/RS232 1 axis controller with optional 800W servo drive
CDS-3310 10/100Base-T Ethernet/RS232 1 axis controller with 500W servo drive
DMC-14x5 10Base-T Ethernet/RS232

Pocket PLC: Smart. Compact. Low-Cost. Packed with I/O.
RIO-47xxx 10/100Base-T Ethernet Intelligent I/O Controller

Stepper and Servo Drives
DMC-40x0 Series Drives Built-in drives for the DMC-40x0 series controller
DMC-21x3 Drives & Accessories Plug-in drives and ICM boards for the DMC-21x3 series controller
AMP-19540 2 or 4 axis Stand-Alone 500W Drive for Brush or Brushless motors

Software Tools
GalilTools
Ladder Interface Software
GalilPVT
Frequency Analysis Software
WSDK

Other
BLM-N23 Brushless Servo Motor
PSR Power Supplies
Controller Upgrade Options
Accessories

Prior generation products
DMC-18x0 PCI Optima Series 1-8 axis
DMC-17x0 ISA Optima Series 1-8 axis
DMC-12x0 PC/104 Optima Series 1-8 axis
DMC-22x0 10/100Base-T Ethernet/RS232 Optima Series 1-8 axis
DMC-20x0 USB/RS232 Optima Series 1-8 axis
DMC-1411 PC/104 1 axis
DMC-1412 RS232 1 axis motion controller
DMC-1417 PCI 1 axis motion controller
IOC-7007 10/100 Base-T Ethernet Intelligent I/O Controller

Legacy Series - Not recommended for new designs
DMC-15x0 RS232 Legacy Series 1-8 axis
DMC-10x0 ISA Legacy Series 1-8 axis

Obsolete Products
Obsolete Products List




Since our introduction of the first microprocessor-based motion controller in 1983, Galil has remained the industry's leading innovator. By offering our
customers the most powerful, cost-effective and simple-to-use motion controllers available today, our commitment is to be your primary source for any
motion control application.