Sales & Support: 1.800.377.6329

Print This Page

RIO-47xxx

Pocket PLC with Ethernet/RS232

RIO-47xxx_image

Product Description

The RIO-471x0 is a compact PLC with Ethernet that is smart, easy-to-use and cost-effective. The RIO contains a fast RISC processor for handling I/O logic and is programmed using Galil's intuitive command language or using Galil's Ladder Interface software.

Each RIO unit is self-contained with numerous analog and digital I/O including: 8 analog inputs, 8 analog outputs, 16 optically isolated inputs, 8 highpower isolated outputs and 8 low-power isolated outputs. The RIO-47100 provides 0-5V analog I/O and the RIO-47120 provides configurable +/-10V, +/-5V, 0-5V, or 0-10V analog I/O. The RIO can be configured to operate as a Modbus TCP master or slave, and multiple RIO units can be distributed on an Ethernet network allowing I/O expansion.

The RIO-47142 model has an internal switch with two Ethernet ports which allow daisy chaining of RIO units without an external switch. It can also easily communicate with other devices including Galil's DMC-40x0, DMC-41x3 and DMC-30000 Ethernet motion controllers.

Measuring just 3.88" x 4.26" x 1.30", the RIO-471xx is packaged in a compact metal enclosure and provides D-type connectors for convenient interface.

The RIO-47200 is a DIN rail mount unit with screw terminals. The RIO-47202 is the same as a 47200 but has expanded memory.

The RIO-47300 is a DIN rail mount unit with screw terminals, 24 digital inputs, 24 high power outputs, 8 analog in, 8 analog out, dual Ethernet, and expanded memory.


Questions?

Call 1.800.377.6329 to speak with a Galil Application Engineer.

Product Features

  • Programmable logic controller (PLC) that is smart, compact and cost-effective
  • (1) 10/100 Base-T Ethernet port (2 with RIO-47142) and (1) RS232 port up to 115/19.2 kbaud.
  • ModBus/TCP master or slave
  • Lots of I/O - Model comparison
    8 analog inputs
    8 analog outputs
    16 optically isolated inputs (RIO-47300: 24 opto inputs)
    16 optically isolated outputs (RIO-47300: 24 opto inputs)
  • Analog PID Process Control Loops
  • Multitasking for concurrent execution of up to four application programs.
  • LED indicators for all digital I/O points
  • Contains RISC processor and memory for programming I/O events
  • Easy-to-use, 2-letter Galil programming language
  • Expanded variables, memory and control loops for RIO-471x2 and RIO-472x2
  • Web interface and email capability for sending messages
  • Powered by Power-Over-Ethernet (PoE) or external 18-36V DC input
  • Small Size:
    RIO-471xx: 3.88" x 4.26" x 1.30"; Metal Enclosure
    RIO-472xx: 7.19" x 3.52" with DIN tray;screw terminals
    RIO-473xx: 7.19" x 4.7" with DIN tray;screw terminals
  • D-type connectors for RIO-471xx. Screw terminals for RIO-472xx and RIO-473xx
  • Interface to RTD or Thermocouple temperature sensors with SCB-48x06
  • Galil's Ladder Interface Software is available for converting Relay Ladder Logic programs into deterministic code
  • Custom hardware and firmware options available
  • RoHS CompliantCE CertifiedETL Certification
Part Number Description 1pc/100pc
RIO-47100 Remote I/O Controller with 0-5V analog $295 / $195
RIO-47120 Remote I/O Controller with +/-10V analog $345 / $245
RIO-47120-16 RIO-47120 with 16-bit ADC/DAC $395 / $295
RIO-47102 RIO-47100 with expanded memory $345 / $245
RIO-47122 RIO-47120 with expanded memory $395 / $295
RIO-47142 Two Ethernet ports. No Power-Over-Ethernet. Expanded Memory. Bipolar analog I/O $415 / $305
RIO-47200 RIO w/screw terminals, DIN & 5Vanalog in $345 / $245
RIO-47202 RIO-47200 with expanded memory $395 / $295
RIO-47300 RIO with 48 digital I/O. 16 analog I/O. Screw terminals. Two Ethernet ports. Expanded Memory. $495 / $360
ICS-48026-M 26-pin D HD male to screw terminals $75 / $50
ICS-48044-M 44-pin D HD male to screw term (I/O) $75 / $50
SCB-48206 Signal conditioning board for RTDs $175 / $125
SCB-48306-KTYPE Signal conditioning board for K thermocouples $175 / $125
SCB-48316-KTYPE Signal conditioning board for K thermocouples $225 / $175
SCB-48306-JTYPE Signal conditioning board for J thermocouples $175 / $125
SCB-48316-JTYPE Signal conditioning board for J thermocouples $225 / $175
PS-2.50-24 60 Watt Power Supply (2.5Amps at 24V) $85 / $60
CABLE-44-1m 44-pin HD male D to discrete wires-1 meter $35 / $24
CABLE-44-2m 44-pin HD male D to discrete wires-2 meter $40 / $27
CABLE-26-1m 26-pin HD male D to discrete wires-1 meter $25 / $25
-DIN rail mounting clip for RIO -DIN rail mounting clip for RIO $25 / $20
Ladder Interface Software Ladder Interface Software $195
GalilSuite Servo Tuning and Analysis with Program Editor and Terminal $195
GalilSuite-Lite GalilSuite software without Scope and Tuner $0
Note: Pricing shown is for domestic purchases only.