NZ

 Syntax:Explicit or Implicit
Operands:_NZn
Burn:burnable with BN

Notch Zero

Hardware: DMC40x0 DMC41x3 DMC21x3 DMC18x6 DMC18x2 DMC300x0

Full Description

The NZ command sets the real part of the notch zero.

Arguments

NZ n,n,n,n,n,n,n,n      or          NZA=n           where
n is ranges from 1 Hz to 1 / (16 * update period)
update period = TM/(10^6)
n = ?      Returns the value of the Notch filter zero for the specified axis.

Usage

Usage and Default Details
UsageValue
While MovingYes
In a ProgramYes
Command LineYes
Controller UsageAll
Default Value0.5
Default FormatN/A

Operand Usage

_NZn contains the value of the Notch filter zero for the specified axis.

Related Commands

NB - Notch Bandwidth
NF - Notch Filter

Examples:

NZA = 10	Sets the real part of the notch pole to 10/2 Hz