Previous
HomeNext
- Analog input
Symbol:
Description:
Read analog input at a specified variable location. Analog inputs should be accessed on the RIO using V300-V307.
In the example below, a sine wave is coming in on the analog input 6 and two comparative contacts are used to set digital outputs Y0 and Y2 when the voltage goes below the constant K2 (2Volts) or above the constant K3 (3Volts).
Range:
V300-V307
Memory Map
Type: Boxes (Data manipulation and math functions)
Example Ladder Program:
GalilTools Scope Output:
Copyright 2008 Galil Motion Control Inc. 270 Technology Way, Rocklin, CA 95765 USA. All rights reserved