Sales & Support: 1.800.377.6329

Posts in the ‘Miscellaneous’ Category

Galil 2-day Live Training Coming in February 2014

Posted on Tuesday, November 19th, 2013 by Galil_AnnK
Posted in DMC Programming, Drives, Feedback Devices, I/O Control, Inside Galil, Miscellaneous, Motion Controllers, Motors, ServoTrends, Software | No Comments »

Our next two-day product school is Thursday February 6, 2014 through February 7, 2014. If you are new to Galil, sign-up now! The training will be at our headquarters in Rocklin, CA (near Sacramento). This technical training provides an overview of ...
Read This Article »

ETL Option for Galil Controllers

Posted on Wednesday, January 16th, 2013 by Andy Herum at Galil
Posted in Drives, I/O Control, Miscellaneous, Motion Controllers | Comments Off

Galil offers a number of products that are available with ETL certification. ETL certification indicates that the product has been tested to and has met the minimum requirements of a widely recognized U.S. product safety standard. The ETL mark is accepted ...
Read This Article »

ETL option now available for DMC-30000

Posted on Thursday, October 18th, 2012 by Robin Riley at Galil
Posted in I/O Control, Miscellaneous, Motion Controllers | Comments Off

Galil’s DMC-30000 single-axis motion controllers are now available with ETL certification. ETL certification is a standard, no-charge feature for the DMC- 30010, DMC-30011, DMC-30012, DMC-30017, DMC-31010, DMC-31011, DMC-31012 and DMC-31017 motion controllers. To order a DMC-30000 with ETL, specify –ETL ...
Read This Article »

Saving Data Record Sources to Disk

Posted on Tuesday, October 16th, 2012 by DJ Roberts at Galil
Posted in Miscellaneous, Software | 2 Comments »

This article provides a sample project demonstrating one method for writing desired data record values to disk. The data record is a "snapshot" of the controller's state which can be dispatched at a user-defined interval.  This utility allows the user ...
Read This Article »

New 2-Minute Galil Video – Best Practices for Using Galil’s Optoisolated Outputs

Posted on Thursday, October 11th, 2012 by Galil_MarissaT
Posted in I/O Control, Miscellaneous | Comments Off

Galil has recently added a new video to its growing library of 2-minute instructional videos. This latest video gives recommendations for wiring and supply voltages when connecting to the optically isolated outputs on Galil controllers. Galil’s latest generation controllers including the ...
Read This Article »

Galil Controller Used to Help Paraplegic Surgeon Perform Operations Again

Posted on Monday, July 16th, 2012 by Mark Middleton at Galil
Posted in Miscellaneous, ServoTrends | Comments Off

Every so often, Galil is given the opportunity to support an application that can truly change the life of others. This last spring, Galil was contacted by a group of students from the University of Wisconsin asking for us to ...
Read This Article »

Generating a random number on a DMC motion controller

Posted on Monday, June 6th, 2011 by Stephen Otis at Galil
Posted in DMC Programming, Miscellaneous | Comments Off

Sometimes it is desirable to be able to generate a random number inside a Galil motion controller. This may used as a foundation for simulating possible IO configurations, testing truly random move lengths, making variable wait times, or other purposes. ...
Read This Article »

Galil Motor Controller Aids Development of Multilayer Laue Lens

Posted on Friday, February 25th, 2011 by Mark Middleton at Galil
Posted in Miscellaneous | 1 Comment »

Project: Galil SmartMoves article>NSLS at Brookhaven National Laboratory_V5 Galil Motor Controller Aids Development of Multilayer Laue Lens Designed For Directing Synchrotron Light. Visible light. Whether it's generated by the sun or an incandescent bulb, it's what helps us see the many colors ...
Read This Article »

CamSoft Provides CNC Operator Interface for Galil Motion Controllers

Posted on Friday, January 23rd, 2009 by Lisa Wade at Galil
Posted in Miscellaneous, Software | Comments Off

PC-based CNC software for Galil motion controllers is available from CamSoft Corporation. CamSoft offers three CNC software packages in addition to a graphical operator interface for non-CNC general automation applications. CamSoft's CNC packages work with Galil's DMC-18xx PCI Motion Controllers and ...
Read This Article »

Using Modbus and Think & Do and RIO Pocket PLC

Posted on Tuesday, September 16th, 2008 by Jason Rhodewalt at Galil
Posted in I/O Control, Miscellaneous | Comments Off

Galil recently enhanced the feature set of the RIO-471x0 Pocket PLC to include more Modbus functionality. These new enhancements now allow the RIO Pocket PLC to communicate seamlessly to Think & Do software via Modbus TCP/IP. Think& Do is a software ...
Read This Article »