My DMC 30012 is was formally working OK. I updated the firmware, some strange issues started occurring "Variable error Line 751.0000 before abort modified CMDERR"
Now the controller is no longer visible in Galil tools and the error light is on. have tried a master reset.
no joy!
any help appreciated
thanks.
Colin
MattK on 01/11/2017 - 11:20
Hello Colin,
This sounds like a failed firmware download. There are a few reasons the red error LED will illuminate, one of which is due to just this.
In order to recover you'll need a straight through Serial cable in order to communicate with the controller via RS-232 or USB-serial converter at 115200 baud. The steps to recover from a failed firmware download are as follows:
You should now be able to communicate with your controller over serial. You'll need to reassign an IP address in order to communicate over Ethernet.